NSN 5905-00-854-2672 · NIIN 008542672 · FSC 5905
NO DASHES 5905008542672
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEDX | SHAFT STYLE | |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -50.0 TO 50.0 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.070 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 1.125 |
| ADAT | BODY WIDTH | INCHES NOMINAL 0.190 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 1.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | PIN 3 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 175.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED LOWER ADJACENT SIDE SINGLE ROW |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 70.0 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.320 |
| ABJT | TERMINAL LENGTH | INCHES NOMINAL 0.500 |
| ABKW | OVERALL HEIGHT | INCHES NOMINAL 0.820 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.190 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.088 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.115 |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | INCHES NOMINAL 0.700 |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE(S) |
| ADAU | BODY HEIGHT | INCHES NOMINAL 0.320 |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | INCHES NOMINAL 1.000 |
| FEAT | SPECIAL FEATURES | MOUNTING STANDOFFS |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES NOMINAL 0.900 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 20.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 224P45-203 | 80294 |