NSN 5905-00-855-3121 · NIIN 008553121 · FSC 5905
NO DASHES 5905008553121
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABXF | SHAFT LENGTH | INCHES MAXIMUM 0.045 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AAPN | SECTION QUANTITY | 1 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.480 AND INCHES MAXIMUM 0.520 |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | INCHES MINIMUM 0.500 AND INCHES MAXIMUM 0.540 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.480 AND INCHES MAXIMUM 0.520 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 9000.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 175.0 |
| CQTM | TERMINAL LOCATION | REAR END |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -50.0 TO 50.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 1.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| AAQL | BODY STYLE | |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 70.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 10001--IL-STD-202A |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.170 AND INCHES MAXIMUM 0.210 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.170 AND INCHES MAXIMUM 0.210 |
| ABTD | MOUNTING SLOT WIDTH | INCHES MINIMUM 0.090 AND INCHES MAXIMUM 0.096 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.058 AND INCHES MAXIMUM 0.098 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 0.545 |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| AXGY | MOUNTING METHOD | SLOT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | OHMS SINGLE SECTION 500.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 3 |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 9000.0 |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 0.480 AND INCHES MAXIMUM 0.520 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 3250L1-501 | 80294 |
| L603003133 | 80294 |
| 2265001-3 | 10001 |
| 541S500-2 | 16170 |
Supersedes
This item replaces cancelled NIIN 008118210. An older drawing citing one of those numbers resolves here.