NSN 5905-00-859-2933 · NIIN 008592933 · FSC 5905
NO DASHES 5905008592933
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 50.00 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| AEDA | MOUNTING LIP DEPTH | INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0620 |
| AEDX | SHAFT STYLE | |
| BYDT | BEARING TYPE | SHAFT BEARING |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | MINIMUM 3600.0 AND MAXIMUM 3604.0 |
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 1.0000 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 1.000 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.249 AND INCHES MAXIMUM 0.250 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 0.40 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 5.88 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 3600.0 AND MAXIMUM 3604.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -0.05 TO 0.05 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 85.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -20.0 TO 20.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 3.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -3.0 TO 3.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION 360 DEG SINE |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 40.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.437 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 1.573 |
| AAPN | SECTION QUANTITY | 1 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.8740 AND INCHES MAXIMUM 0.8750 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.010 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.874 AND INCHES MAXIMUM 0.875 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0630 AND INCHES MAXIMUM 0.0730 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 0.50 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| AAQL | BODY STYLE |