NSN 5905-00-865-5468 · NIIN 008655468 · FSC 5905
NO DASHES 5905008655468
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
43 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 2.063 |
| AEDX | SHAFT STYLE | |
| AFJN | FRAGILITY FACTOR | MODERATELY DELICATE |
| CQPH | DEVICE DESIGN TYPE | AT 12:00 OCLOCK |
| AEFP | NONTURN DEVICE RADIUS | INCHES NOMINAL 0.563 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.2494 AND INCHES MAXIMUM 0.2497 |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 3600.0 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES NOMINAL 0.253 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.563 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 1.813 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.375 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 50.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 3600.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -0.15 TO 0.15 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 105.0 |
| AEGA | LATERAL RUNOUT | INCHES 0.002 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 5.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -3.0 TO 3.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -20.0 TO 20.0 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 40.0 |
| PMLC | PRECIOUS MATERIAL AND LOCATION | GOLD TER-INALS |
| PRMT | PRECIOUS MATERIAL | GOLD |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 07187-2504764 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 2.00 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.813 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 2.00 |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.002 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFZ | SHAFT RUNOUT | INCHES 0.002 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 1.750 |
| AEGC | SHAFT RADIAL PLAY | INCHES 0.0025 |
| AEFY | SHAFT END PLAY | INCHES 0.005 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 3400S-1-503L | 32997 |
| 3400S1-503 | 80294 |
| 3400 | K5743 |
| 2504764-13 | 07187 |
| 3600-840 | 11534 |
Supersedes
This item replaces cancelled NIIN 010793337. An older drawing citing one of those numbers resolves here.