NSN 5905-00-865-5492 · NIIN 008655492 · FSC 5905
NO DASHES 5905008655492
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABNC | FLAT HEIGHT | INCHES NOMINAL 0.219 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.250 |
| FEAT | SPECIAL FEATURES | W/SPECIAL FEATURES FOR PROPER FUNCTIONING OF THE ITEM |
| ABNB | FIRST FLAT LENGTH | INCHES NOMINAL 0.375 |
| AEGD | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 0.0 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 2.375 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 3.000 |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.250 |
| ABJT | TERMINAL LENGTH | INCHES NOMINAL 0.125 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.375 |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 2.490 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 300.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 50.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| ADAQ | BODY LENGTH | INCHES NOMINAL 1.375 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 63743-K44531-3000 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | FORM EW |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 300.0 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.875 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES NOMINAL 0.375 |
| CQPH | DEVICE DESIGN TYPE | AT 12:00 OCLOCK |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 50.0 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MILR15109F0RMEW | 81349 |
| 1500-80-2-40 | 92013 |
| N152/P9660 | 17745 |
| K44531-3000 | 17745 |