NSN 5905-00-873-3113 · NIIN 008733113 · FSC 5905
NO DASHES 5905008733113
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 150.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED LOWER ADJACENT SIDE SINGLE ROW |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -50.0 TO 50.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.75 |
| TTQY | TERMINAL TYPE AND QUANTITY | PIN 3 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.205 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 1.0 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 85.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-39015 |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | INCHES NOMINAL 0.520 |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | ESTABLISHED |
| AARH | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 1.000 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 0.555 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.172 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-39015 TO 2 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.073 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.078 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.045 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 0.500 |
| ADAT | BODY WIDTH | INCHES NOMINAL 0.205 |
| ADAU | BODY HEIGHT | INCHES NOMINAL 0.515 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES NOMINAL 0.200 |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | INCHES NOMINAL 0.100 |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 0.662 |
| AXGY | MOUNTING METHOD | TERMINAL AND UNTHREADED HOLE(S) |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 83289-102D5D | 26916 |
| 3255W-66-102 | 32997 |
| 1584469-2 | 64547 |
| 3250W-C35-102 | 80294 |
| 3250X-501-102 | 80294 |
| 3250W792-102 | 80294 |
| RTR22DX102M | 81349 |
| MIL-R-39015/2 | 81349 |
| M39015/2-004XM | 81349 |
| MIL-PRF-39015/2 | 81349 |
| 938-062-4102 | 95542 |
Supersedes
This item replaces cancelled NIINs 001360321 · 004900236 · 010386349 · 013082042. An older drawing citing one of those numbers resolves here.