NSN 5905-00-880-3702 · NIIN 008803702 · FSC 5905
NO DASHES 5905008803702
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
40 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 0.531 |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 40.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 2.5 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 3 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -0.10 TO 0.10 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 125.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED REAR END |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 0.15 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 0.15 |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 20.00 |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | MINIMUM 3600.0 |
| AEGA | LATERAL RUNOUT | INCHES 0.0015 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.625 |
| ABWV | SHAFT DIAMETER | INCHES MAXIMUM 0.0935 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.375 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 1.125 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -3.0 TO 3.0 |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES MAXIMUM 0.3750 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| AEFY | SHAFT END PLAY | INCHES 0.00500 |
| ABPA | UNDERCUT DIAMETER | INCHES MAXIMUM 0.375 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 0.531 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| BYDT | BEARING TYPE | SHAFT BALL |
| CBME | CUBIC MEASURE | CUBIC INCHES 0.360 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 5.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 3600.0 |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0620 |
| AECZ | MOUNTING LIP DIAMETER | INCHES MAXIMUM 0.5310 |
| AEFZ | SHAFT RUNOUT | INCHES 0.0015 |