NSN 5905-00-887-9556 · NIIN 008879556 · FSC 5905
NO DASHES 5905008879556
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABPM | BODY DIAMETER | INCHES MAXIMUM 2.810 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | OHMS SINGLE SECTION 100.0 |
| ABNC | FLAT HEIGHT | INCHES MINIMUM 0.211 AND INCHES MAXIMUM 0.221 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 340.0 |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 3.225 |
| AEDX | SHAFT STYLE | |
| AEEZ | CONTACT ARM ELECTRICAL OFF POSITION | FULLY CCW |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AEFP | NONTURN DEVICE RADIUS | INCHES MINIMUM 0.485 AND INCHES MAXIMUM 0.515 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.375 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| ADAP | MOUNTING BUSHING LENGTH | INCHES MINIMUM 0.328 AND INCHES MAXIMUM 0.422 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 1.780 |
| ABJT | TERMINAL LENGTH | INCHES MAXIMUM 0.415 |
| ABNB | FIRST FLAT LENGTH | INCHES NOMINAL 0.344 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | HEAT SINK SINGLE SECTION 75.0 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 48.00 |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 240.00 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 3.327 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.250 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 295.0 AND MAXIMUM 310.0 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 25.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-22 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-22 TO 7 |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.828 AND INCHES MAXIMUM 0.922 |
| CQPH | DEVICE DESIGN TYPE | LOCATION NOT OTHERWISE SPECIFIED AT 12:00 OCLOCK |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| M22/07-00152FD | 81349 |
| MILR22-7 | 81349 |
| MIL-PRF-22/7 | 81349 |
| RP202FD101KK | 81349 |
Supersedes
This item replaces cancelled NIIN 002592301. An older drawing citing one of those numbers resolves here.