NSN 5905-00-901-5273 · NIIN 009015273 · FSC 5905
NO DASHES 5905009015273
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 6 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -1.0 TO 1.0 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 40.0 |
| ADAU | BODY HEIGHT | INCHES NOMINAL 0.750 |
| FEAT | SPECIAL FEATURES | 4 TAPPED HOLES TWO EA ON OPPOSITE SIDES SPACED 5.500 IN. C TO C |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 77272-114ES205-1 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 40.0 |
| AKPV | MOUNTING FACILITY QUANTITY | 4 |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -0.50 TO 0.50 |
| AAQL | BODY STYLE | |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 1.250 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 6.000 |
| ADAT | BODY WIDTH | INCHES NOMINAL 1.000 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 160.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RIGHT-LEFT ADJACENT SIDES |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 1.0 |
| AEFT | LONGITUDINAL ACTUATOR TRAVEL | INCHES MINIMUM 3.985 |
| AEFW | LONGITUDINAL ACTUATOR EFFECTIVE ELECTRICAL STROKE LENGTH | INCHES NOMINAL 1.320 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.112 |
| AAPN | SECTION QUANTITY | 1 |
| AXGY | MOUNTING METHOD | THREADED HOLE(S) |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AASA | THREAD LENGTH | INCHES NOMINAL 1.000 |
| ABWV | SHAFT DIAMETER | INCHES MAXIMUM 0.1875 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | OHMS SINGLE SECTION 140.0 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEDX | SHAFT STYLE |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 2001091701 | 25413 |
| 114ES205-2 | 77272 |
| 114ES205-1 | 77272 |
| 20-0109-1701 | 80294 |
| RP67-0101-1 | 98284 |
| 190-5-01 | 18053 |