NSN 5905-00-903-5709 · NIIN 009035709 · FSC 5905
NO DASHES 5905009035709
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 5760.0 |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.140 AND INCHES MAXIMUM 0.200 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -70.0 TO 70.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 3 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.080 AND INCHES MAXIMUM 0.125 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 175.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED REAR END |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 70.0 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 5.0 |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.075 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 6.000 |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 0.305 AND INCHES MAXIMUM 0.325 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.170 AND INCHES MAXIMUM 0.190 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.086 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 5.00 |
| ABXF | SHAFT LENGTH | INCHES MAXIMUM 0.750 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.970 AND INCHES MAXIMUM 1.030 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE(S) |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 1.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.305 AND INCHES MAXIMUM 0.325 |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | INCHES MINIMUM 0.740 AND INCHES MAXIMUM 0.760 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 900024-53 | 06481 |
Supersedes
This item replaces cancelled NIIN 009093661. An older drawing citing one of those numbers resolves here.