NSN 5905-00-907-2006 · NIIN 009072006 · FSC 5905
NO DASHES 5905009072006
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.001 |
| AEGA | LATERAL RUNOUT | INCHES 0.002 |
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 1.7500 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -0.30 TO 0.30 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AEDA | MOUNTING LIP DEPTH | INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0670 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0780 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 1.750 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.2495 AND INCHES MAXIMUM 0.250 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 10.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.578 AND INCHES MAXIMUM 0.922 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 10.00 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | MINIMUM 353.0 AND MAXIMUM 355.0 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 1.5615 AND INCHES MAXIMUM 1.5620 |
| AAVM | PILOT LENGTH | INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0670 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 10.00 |
| AEFZ | SHAFT RUNOUT | INCHES 0.001 |
| AAPN | SECTION QUANTITY | 1 |
| ABNB | FIRST FLAT LENGTH | INCHES NOMINAL 0.438 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 1.5615 AND INCHES MAXIMUM 1.562 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 45916 | 82340 |