NSN 5905-00-910-0730 · NIIN 009100730 · FSC 5905
NO DASHES 5905009100730
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | INCHES NOMINAL 0.520 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.375 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES NOMINAL 0.250 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 0.500 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 85.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -1.0 TO 1.0 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 360.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 40.0 |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.093 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.250 |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE(S) AND STANDARD BUSHING |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 0.70 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 0.70 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.250 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| ADAT | BODY WIDTH | INCHES NOMINAL 0.1875 |
| ADAU | BODY HEIGHT | INCHES NOMINAL 0.500 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED REAR END |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 2.5 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | OHMS SINGLE SECTION 500.0 |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |