ATLASAir Supply

321-252-9430Mon–Fri · 8a–6p ET
Quote0 Request a Quote →
Home / MS parts / Electrical & Electronic Components / NSN 5905-00-910-5716
NSN 5905-00-910-5716  ·  NIIN 009105716  ·  FSC 5905
NO DASHES 5905009105716
In Stock

RESISTOR,VARIABLE,WIRE WOUND,PRE

Resistor

Technical characteristics

54 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

MRCRequirementValue
CRGMFUNCTION CONFORMITY PER SECTIONSINGLE SECTION TERMINAL BASE LINEARITY
CSBXFUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
AKPVMOUNTING FACILITY QUANTITY3
BYDTBEARING TYPESHAFT BALL
CQCCELECTRICAL RESISTANCE PER SECTIONKILOHMS SINGLE SECTION 100.0
CQCHTAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATIONSINGLE SECTION 180.0 AND SINGLE SECTION 3420.0
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEGMINIMUM 3600.0 AND MAXIMUM 3610.0
CQFLFUNCTION CONFORMITY TOLERANCE PER SECTIONSINGLE SECTION -0.05 TO 0.05
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWERSINGLE SECTION 125.0
CQTMTERMINAL LOCATIONLOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTSFREE AIR SINGLE SECTION 3.0
AAPNSECTION QUANTITY1
CRJSFIXED TAP QUANTITY PER SECTIONSINGLE SECTION 2
AXGYMOUNTING METHODCLAMP RING(S) AND THREADED HOLE(S)
AJYQSCREW THREAD QUANTITY PER INCH56.0
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWERSINGLE SECTION 40.0
PMLCPRECIOUS MATERIAL AND LOCATIONGOLD TER-INAL SURFACES
PRMTPRECIOUS MATERIALGOLD
TESTTEST DATA DOCUMENTDRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 13499-381-1647-000
TTQYTERMINAL TYPE AND QUANTITYTAB, SOLDER LUG 6
AEFMMAXIMUM STOP TORQUEINCH-OUNCES 100.00
AEFYSHAFT END PLAYINCHES 0.005
AEFZSHAFT RUNOUTINCHES 0.002
AEGALATERAL RUNOUTINCHES 0.002
ABXFSHAFT LENGTHINCHES NOMINAL 0.593
ADAQBODY LENGTHINCHES NOMINAL 1.573
ADAVOVERALL DIAMETERINCHES MAXIMUM 1.250
AECZMOUNTING LIP DIAMETERINCHES NOMINAL 0.8750
CRKSTAP LOCATION TOLERANCE PER SECTIONDEG ANGULAR ROTATION SINGLE SECTION -2.0 TO 2.0
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENTSINGLE SECTION -3.0 TO 3.0
CRSXACTUATOR TRAVEL CONTROL FEATURESTOPS
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATIONMINIMUM 3600.0 AND MAXIMUM 3610.0
AEGBPILOT DIAMETER RUNOUTINCHES 0.002
AEGCSHAFT RADIAL PLAYINCHES 0.002
AJYNSCREW THREAD DIAMETERINCHES NOMINAL 0.086
AJYPSCREW THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
AEDXSHAFT STYLE
AEFKMAXIMUM STARTING TORQUEINCH-OUNCES 0.40
ABPMBODY DIAMETERINCHES NOMINAL 0.875
ABUFANGLE OF MOUNTING HOLE IN DEG45.0
ABVJANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG120.0
ABWVSHAFT DIAMETERINCHES MAXIMUM 0.1247
AAQLBODY STYLE
AARGRELIABILITY INDICATORNOT ESTABLISHED
AAVLPILOT DIAMETERINCHES NOMINAL 0.5000
AAVMPILOT LENGTHINCHES NOMINAL 0.0620
ABHPOVERALL LENGTHINCHES NOMINAL 2.166
ABPAUNDERCUT DIAMETERINCHES MAXIMUM 0.625
ABPCUNDERCUT WIDTHINCHES NOMINAL 0.0680
AEFDACTUATOR TYPESINGLE SHAFT WITH GEAR
CSCYTEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUSSINGLE SECTION -20.0 TO 20.0
AEDEMOUNTING HOLE/STUD CIRCLE DIAMETERINCHES NOMINAL 0.343
AEFLMAXIMUM RUNNING TORQUEINCH-OUNCES 0.30
AEDAMOUNTING LIP DEPTHINCHES NOMINAL 0.0620

Cross-references

5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.

Manufacturer part numberCAGE
381-1647-0095105
502-024302111
500-126902111
381-1647-00013499
381-1647-0013499