NSN 5905-00-912-3370 · NIIN 009123370 · FSC 5905
NO DASHES 5905009123370
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
39 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 0.30 |
| AEFZ | SHAFT RUNOUT | INCHES 0.001 |
| AEGC | SHAFT RADIAL PLAY | INCHES 0.001 |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0620 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | MINIMUM 340.0 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 5.0 |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.001 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 0.960 |
| AEGA | LATERAL RUNOUT | INCHES 0.001 |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES MAXIMUM 0.7500 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQDB | RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT | -65 DEG CELSIUS SINGLE SECTION -5.0 TO 0.0 AND 25 DEG CELSIUS SINGLE SECTION -5.0 TO 10.0 AND 150 DEG CELSIUS SINGLE SECTION 0.0 TO 3.0 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 0.27 |
| AEFY | SHAFT END PLAY | INCHES 0.005 |
| ABWV | SHAFT DIAMETER | INCHES MAXIMUM 0.1249 |
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 0.8750 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION EQUATION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 85.0 |
| CXHN | SHAFT BEARING TYPE | BALL |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 97942-579R305H02 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 3 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 2.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION ABSOLUTE CONFORMITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 150.0 |
| CQTM | TERMINAL LOCATION | REAR END |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.530 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0570 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 0.875 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| ABPA | UNDERCUT DIAMETER | INCHES MAXIMUM 0.781 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -1.50 TO 1.50 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 579R305H02 | 79500 |
| 579R305H02 | 97942 |
| 9577 | 04454 |
| 78FTS134-2 | 08815 |
| 751-6593 | 12205 |