NSN 5905-00-913-1844 · NIIN 009131844 · FSC 5905
NO DASHES 5905009131844
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
40 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAPN | SECTION QUANTITY | 2 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 0.875 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 07187-2503160 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS 1ST SECTION 19.66 AND KILOHMS 2ND SECTION 16.67 |
| AECZ | MOUNTING LIP DIAMETER | INCHES MINIMUM 0.8700 AND INCHES MAXIMUM 0.8750 |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0620 |
| AEDX | SHAFT STYLE | |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.7495 AND INCHES MAXIMUM 0.7500 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 0.20 |
| AEFZ | SHAFT RUNOUT | INCHES 0.001 |
| AEGA | LATERAL RUNOUT | INCHES 0.001 |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.001 |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | ALL SECTIONS 85.0 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 350.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 0.35 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.750 |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 1.062 |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | ALL SECTIONS -30.0 TO 30.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR ALL SECTIONS 1.0 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.124 |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 6 |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS TERMINAL BASE LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | ALL SECTIONS -3.0 TO 3.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 40.0 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | ALL SECTIONS -1.00 TO 1.00 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.125 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.313 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.750 |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 2503160 | 56232 |
| PVR09K333B | 99957 |
| PVR090K333B | 04454 |
| 2503160 | 07187 |
| 1200-601-2 | 11534 |
| 1200-601 | 11534 |
| 14W2-2831 | 19176 |