NSN 5905-00-921-0304 · NIIN 009210304 · FSC 5905
NO DASHES 5905009210304
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
39 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 2.0000 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 3.035 |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 2.047 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 20.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 3600.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -0.025 TO 0.025 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 65.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -20.0 TO 20.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 1.20 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 0.80 |
| AEFZ | SHAFT RUNOUT | INCHES 0.002 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 1.875 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 1.812 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -3.0 TO 3.0 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 3600.0 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.875 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 2.150 |
| AAPN | SECTION QUANTITY | 1 |
| AEGA | LATERAL RUNOUT | INCHES 0.002 |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.002 |
| AEGC | SHAFT RADIAL PLAY | INCHES 0.002 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 1.8750 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.2494 AND INCHES MAXIMUM 0.2497 |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0620 |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 40.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| BYDT | BEARING TYPE | SHAFT BALL |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.5 |
| AAQL | BODY STYLE |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 381-9058-030 | 95105 |
| 1801-0003 | 02111 |
| 801-0003 | 02111 |
| 381-9058-030 | 13499 |