NSN 5905-00-921-7814 · NIIN 009217814 · FSC 5905
NO DASHES 5905009217814
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
38 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEGC | SHAFT RADIAL PLAY | INCHES 0.004 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| ABPA | UNDERCUT DIAMETER | INCHES MAXIMUM 1.312 |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS ABSOLUTE LINEARITY |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR ALL SECTIONS 2.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| AAVL | PILOT DIAMETER | INCHES MAXIMUM 1.3125 |
| AEFZ | SHAFT RUNOUT | INCHES 0.001 |
| AEGA | LATERAL RUNOUT | INCHES 0.004 |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.0015 |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | ALL SECTIONS -20.0 TO 20.0 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 70.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 12 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.688 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS 1ST SECTION 48.73 AND KILOHMS 2ND SECTION 9.75 AND KILOHMS 3RD SECTION 97.5 AND KILOHMS 4TH SECTION 9.75 |
| AAPN | SECTION QUANTITY | 4 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | 1ST SECTION -1.0 TO 1.0 AND 2ND SECTION -1.0 TO 1.0 AND 3RD SECTION -5.0 TO 5.0 AND 4TH SECTION -1.0 TO 1.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | ALL SECTIONS 125.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 2.720 |
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 1.4380 |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0930 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 354.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 2.80 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 2.00 |
| AEFY | SHAFT END PLAY | INCHES 0.005 |
| ABWV | SHAFT DIAMETER | INCHES MAXIMUM 0.2497 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| BYDT | BEARING TYPE | SHAFT BALL |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 1.453 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0730 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | ALL SECTIONS -0.15 TO 0.15 |