NSN 5905-00-922-7166 · NIIN 009227166 · FSC 5905
NO DASHES 5905009227166
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.250 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 0.50 |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.719 AND INCHES MAXIMUM 0.781 |
| CRJS | FIXED TAP QUANTITY PER SECTION | ALL SECTIONS 1 |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | OHMS ALL SECTIONS -1.0 TO 1.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | ALL SECTIONS -5.0 TO 5.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | ALL SECTIONS 5000.0 |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 40.0 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 12 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 1.750 |
| AEDX | SHAFT STYLE | |
| ADAQ | BODY LENGTH | INCHES NOMINAL 2.073 |
| AECZ | MOUNTING LIP DIAMETER | INCHES MAXIMUM 1.7500 |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0400 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | ALL SECTIONS 85.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR ALL SECTIONS 2.0 |
| BYDT | BEARING TYPE | SHAFT SLEEVE |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS ALL SECTIONS 10.0 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0730 |
| AEFD | ACTUATOR TYPE | DUAL CONCENTRIC |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 0.50 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.1620 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 1.615 AND INCHES MAXIMUM 1.625 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 1.5610 AND INCHES MAXIMUM 1.5620 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | ALL SECTIONS -0.15 TO 0.15 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAQL | BODY STYLE | |
| AAPN | SECTION QUANTITY | 3 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |