NSN 5905-00-929-7938 · NIIN 009297938 · FSC 5905
NO DASHES 5905009297938
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
46 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | ALL SECTIONS -50.0 TO 50.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR ALL SECTIONS 0.25 |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS ABSOLUTE LINEARITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1ST SECTION 8 AND 2ND SECTION 9 AND 3RD SECTION 9 AND 4TH SECTION 9 AND 5TH SECTION 8 AND 6TH SECTION 8 AND 7TH SECTION 8 |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | DEG ANGULAR ROTATION ALL SECTIONS -1.0 TO 1.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | ALL SECTIONS -10.0 TO 10.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| AAPN | SECTION QUANTITY | 8 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 100.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | ALL SECTIONS -0.50 TO 0.50 |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 1ST SECTION 166.0 AND 1ST SECTION 313.0 AND 1ST SECTION 280.0 AND 1ST SECTION 187.0 AND 1ST SECTION 153.0 AND 1ST SECTION 0.0 AND 1ST SECTION 213.0 AND 1ST SECTION 350.0 AND 2ND SECTION 184.0 AND 2ND SECTION 161.0 AND 2ND SECTION 313.0 AND 2ND SECTION 296.0 AND 2ND SECTION 149.0 AND 2ND SECTION 137.0 AND 2ND SECTION 0.0 AND 2ND SECTION 263.0 AND 2ND SECTION 350.0 AND 3RD SECTION 158.0 AND 3RD SECTION 234.0 AND 3RD SECTION 222.0 AND 3RD SECTION 170.0 AND 3RD SECTION 146.0 AND 3RD SECTION 134.0 AND 3RD SECTION 0.0 AND 3RD SECTION 210.0 AND 3RD SECTION 350.0 AND 4TH SECTION 118.0 AND 4TH SECTION 220.0 AND 4TH SECTION 207.0 AND 4TH SECTION 195.0 AND 4TH SECTION 130.0 AND 4TH SECTION 142.0 AND 4TH SECTION 0.0 AND 4TH SECTION 170.0 AND 4TH SECTION 350.0 AND 5TH SECTION 80.0 AND 5TH SECTION 200.0 AND 5TH SECTION 187.0 AND 5TH SECTION 115.0 AND 5TH SECTION 12.0 AND 5TH SECTION 0.0 AND 5TH SECTION 175.0 AND 5TH SECTION 350.0 AND 6TH SECTION 53.0 AND 6TH SECTION 177.0 AND 6TH SECTION 198.0 AND 6TH SECTION 12.0 AND 6TH SECTION 0.0 AND 6TH SECTION 150.0 AND 6TH SECTION 119.0 AND 6TH SECTION 350.0 AND 7TH SECTION 48.0 AND 7TH SECTION 152.0 AND 7TH SECTION 140.0 AND 7TH SECTION 109.0 AND 7TH SECTION 12.0 AND 7TH SECTION 0.0 AND 7TH SECTION 128.0 AND 7TH SECTION 350.0 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 1.099 AND INCHES MAXIMUM 1.109 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS ALL SECTIONS 5.0 |
| AEGC | SHAFT RADIAL PLAY | INCHES 0.001 |
| AEGD | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 0.25 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.112 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 40.0 |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| AECZ | MOUNTING LIP DIAMETER | INCHES MINIMUM 1.0520 AND INCHES MAXIMUM 1.0670 |
| AEDA | MOUNTING LIP DEPTH | INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0670 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 80045-361644 |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 77 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 4.00 |
| AAVM | PILOT LENGTH | INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0670 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) AND THREADED STUD(S) |
| BYDT | BEARING TYPE | SHAFT BEARING |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 360.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 4.00 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0670 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.1245 AND INCHES MAXIMUM 0.1250 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.734 AND INCHES MAXIMUM 0.766 |
| ADAG | MOUNTING STUD LENGTH | INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.281 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 3.360 AND INCHES MAXIMUM 3.400 |
| AAQL | BODY STYLE | |
| AEFY | SHAFT END PLAY | INCHES 0.001 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.9683 AND INCHES MAXIMUM 0.9688 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 1.052 AND INCHES MAXIMUM 1.067 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 361644 | 80045 |