NSN 5905-00-930-2839 · NIIN 009302839 · FSC 5905
NO DASHES 5905009302839
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
37 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.414 AND INCHES MAXIMUM 0.446 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0420 AND INCHES MAXIMUM 0.0820 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 1.060 AND INCHES MAXIMUM 1.064 |
| AAVM | PILOT LENGTH | INCHES MAXIMUM 0.0620 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.762 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.950 AND INCHES MAXIMUM 0.980 |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 351.5 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.9683 AND INCHES MAXIMUM 0.9689 |
| AAPN | SECTION QUANTITY | 2 |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.001 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 1.270 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | ALL SECTIONS -0.30 TO 0.30 |
| ABWV | SHAFT DIAMETER | INCHES MAXIMUM 0.120 |
| AEDA | MOUNTING LIP DEPTH | INCHES MINIMUM 0.0420 AND INCHES MAXIMUM 0.0820 |
| AEDX | SHAFT STYLE | |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR ALL SECTIONS 2.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | ALL SECTIONS -5.0 TO 5.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS ALL SECTIONS 1.0 |
| AECZ | MOUNTING LIP DIAMETER | INCHES MINIMUM 1.0420 AND INCHES MAXIMUM 1.0820 |
| BYDT | BEARING TYPE | SHAFT BALL |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 40.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 6 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | ALL SECTIONS 105.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | ALL SECTIONS -300.0 TO 300.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 3.00 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 3.00 |
| AEFY | SHAFT END PLAY | INCHES 0.003 |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 1.400 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 120-353 | 02111 |
| 120 SERVO 1K/1K | 02111 |
| 3292 | 04454 |
| 914042-0001 | 06481 |
Supersedes
This item replaces cancelled NIIN 000669331. An older drawing citing one of those numbers resolves here.