NSN 5905-00-930-4120 · NIIN 009304120 · FSC 5905
NO DASHES 5905009304120
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.172 AND INCHES MAXIMUM 0.202 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | OHMS SINGLE SECTION 100.0 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED REAR END |
| AAQL | BODY STYLE | |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 85.0 |
| CBME | CUBIC MEASURE | CUBIC INCHES 0.029 |
| AXGY | MOUNTING METHOD | TERMINAL |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.088 AND INCHES MAXIMUM 0.098 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.075 AND INCHES MAXIMUM 0.085 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.397 AND INCHES MAXIMUM 0.413 |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.180 AND INCHES MAXIMUM 0.200 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 150.0 |
| BYDT | BEARING TYPE | SHAFT SLEEVE |
| FEAT | SPECIAL FEATURES | SEALED TO PERMIT CLEANING IN COMMON SOLVENTS |
| TTQY | TERMINAL TYPE AND QUANTITY | PIN 3 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.75 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.370 AND INCHES MAXIMUM 0.380 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | MINIMUM 6480.0 AND MAXIMUM 10080.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 5.00 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 5.00 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES NOMINAL 0.200 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 6480.0 AND MAXIMUM 10080.0 |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | INCHES NOMINAL 0.100 |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| AAPN | SECTION QUANTITY | 1 |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -50.0 TO 50.0 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 50-3-1-101 | C7407 |
| 459001-8 | F0057 |
| 50-3-1-101 | 02111 |