NSN 5905-00-932-4986 · NIIN 009324986 · FSC 5905
NO DASHES 5905009324986
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
41 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.05700 AND INCHES MAXIMUM 0.06700 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.955 |
| ABPA | UNDERCUT DIAMETER | INCHES MAXIMUM 0.781 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 1.580 |
| AECZ | MOUNTING LIP DIAMETER | INCHES MINIMUM 0.85900 AND INCHES MAXIMUM 0.89100 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 125.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 2.5 |
| AAVM | PILOT LENGTH | INCHES MINIMUM 0.05700 AND INCHES MAXIMUM 0.06700 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.62450 AND INCHES MAXIMUM 0.62500 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.125 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.344 AND INCHES MAXIMUM 0.406 |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.00150 |
| AEGC | SHAFT RADIAL PLAY | INCHES 0.002 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 0.30 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -3.0 TO 3.0 |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 96.00 |
| AEDA | MOUNTING LIP DEPTH | INCHES MINIMUM 0.05700 AND INCHES MAXIMUM 0.06700 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | MINIMUM 3600.0 AND MINIMUM 3610.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 0.40 |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 2.000 |
| AEFZ | SHAFT RUNOUT | INCHES 0.001 |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -20.0 TO 20.0 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 70.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 3 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| AEGA | LATERAL RUNOUT | INCHES 0.003 |
| AEFY | SHAFT END PLAY | INCHES 0.00300 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 3600.0 AND MAXIMUM 3610.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -0.20 TO 0.20 |
| BYDT | BEARING TYPE | SHAFT BALL |
| ABPM | BODY DIAMETER | INCHES MINIMUM 0.859 AND INCHES MAXIMUM 0.891 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 1000-0160 | 33051 |
| 3550S1-202 | 80294 |