NSN 5905-00-945-6306 · NIIN 009456306 · FSC 5905
NO DASHES 5905009456306
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 2.000 |
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 1.7500 |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0930 |
| AEDX | SHAFT STYLE | |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | ALL SECTIONS -0.15 TO 0.15 |
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0730 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 1.00 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 1.5610 AND INCHES MAXIMUM 1.5620 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | ALL SECTIONS -5.0 TO 5.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 1.750 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.249 AND INCHES MAXIMUM 0.250 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.688 AND INCHES MAXIMUM 0.750 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 1.442 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 1.10 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 2.317 |
| ABPA | UNDERCUT DIAMETER | INCHES MAXIMUM 0.562 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS ALL SECTIONS 5.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR ALL SECTIONS 3.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS ABSOLUTE LINEARITY |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 10001-2325869 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 354.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 6 |