NSN 5905-00-945-7170 · NIIN 009457170 · FSC 5905
NO DASHES 5905009457170
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
39 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| AAVM | PILOT LENGTH | INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0670 |
| AEGC | SHAFT RADIAL PLAY | INCHES 0.002 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 85.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 3600.0 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.875 |
| AEFZ | SHAFT RUNOUT | INCHES 0.002 |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.002 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.250 |
| ABXF | SHAFT LENGTH | INCHES MAXIMUM 2.250 |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 1.0750 AND INCHES MAXIMUM 1.0760 |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDER STUD 3 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -3.0 TO 3.0 |
| ABPA | UNDERCUT DIAMETER | INCHES MAXIMUM 1.875 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0730 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 2.250 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -0.10 TO 0.10 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 150.0 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.594 AND INCHES MAXIMUM 0.656 |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 2.250 |
| AECZ | MOUNTING LIP DIAMETER | INCHES MINIMUM 1.9000 AND INCHES MAXIMUM 2.0050 |
| AEDA | MOUNTING LIP DEPTH | INCHES MINIMUM 0.0880 AND INCHES MAXIMUM 0.0980 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 1.20 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 0.80 |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 1.50 |
| AEFY | SHAFT END PLAY | INCHES 0.005 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 7.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -30.0 TO 30.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 10.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| R080-408-1033 | 07421 |
| 3700-711 | 11534 |