NSN 5905-00-948-8439 · NIIN 009488439 · FSC 5905
NO DASHES 5905009488439
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
34 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | OHMS SINGLE SECTION 350.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.250 |
| AAQL | BODY STYLE | |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 160.00 |
| AXGY | MOUNTING METHOD | THREADED HOLE(S) |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 2.000 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 4.457 |
| ABNB | FIRST FLAT LENGTH | INCHES MINIMUM 1.500 |
| ABNC | FLAT HEIGHT | INCHES NOMINAL 0.344 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 6.090 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 310.0 AND MAXIMUM 325.0 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 2.410 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | HEAT SINK SINGLE SECTION 300.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 25.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 390.0 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.375 |
| CQPH | DEVICE DESIGN TYPE | LOCATION NOT OTHERWISE SPECIFIED AT 3:00 OCLOCK AND AT 9:00 OCLOCK |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 20.0 |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| FEAT | SPECIAL FEATURES | TWO MTG HOLES SPACED 180 DEG ON 1.190 IN. RADIUS |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-22 TO 11 |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 6.810 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-22 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES NOMINAL 0.500 |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 240.00 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MILR22-11 | 81349 |
| M22/11-00181FJ | 81349 |
| MIL-PRF-22/11 | 81349 |
| RP401FJ351KK | 81349 |
Supersedes
This item replaces cancelled NIIN 004293088. An older drawing citing one of those numbers resolves here.