NSN 5905-00-949-7903 · NIIN 009497903 · FSC 5905
NO DASHES 5905009497903
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 2.952 |
| ABNC | FLAT HEIGHT | INCHES MINIMUM 0.211 AND INCHES MAXIMUM 0.221 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 2.030 |
| ABNB | FIRST FLAT LENGTH | INCHES NOMINAL 0.344 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 10.0 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 4.060 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES MINIMUM 0.328 AND INCHES MAXIMUM 0.422 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 4.470 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-22 TO 9 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.248 AND INCHES MAXIMUM 0.251 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.828 AND INCHES MAXIMUM 0.922 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-22 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | HEAT SINK SINGLE SECTION 150.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 25.0 |
| AAPN | SECTION QUANTITY | 1 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 48.00 |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 240.00 |
| AEFP | NONTURN DEVICE RADIUS | INCHES NOMINAL 0.500 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.375 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AEDX | SHAFT STYLE | |
| CQPH | DEVICE DESIGN TYPE | LOCATION NOT OTHERWISE SPECIFIED AT 12:00 OCLOCK |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 290.0 AND MAXIMUM 315.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 390.0 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| RP301FD103KK | 81349 |
| MIL-PRF-22/9 | 81349 |
| MILR22-9 | 81349 |
| M22/09-00281FD | 81349 |
Supersedes
This item replaces cancelled NIINs 001587545 · 002357821 · 008476425 · 009932207. An older drawing citing one of those numbers resolves here.