NSN 5905-00-950-7246 · NIIN 009507246 · FSC 5905
NO DASHES 5905009507246
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
39 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AECZ | MOUNTING LIP DIAMETER | INCHES MINIMUM 1.9900 AND INCHES MAXIMUM 2.0100 |
| ABWV | SHAFT DIAMETER | INCHES MAXIMUM 0.250 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.198 AND INCHES MAXIMUM 0.218 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.990 AND INCHES MAXIMUM 1.010 |
| AEDA | MOUNTING LIP DEPTH | INCHES MINIMUM 0.0680 AND INCHES MAXIMUM 0.0850 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 40.0 |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.001 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 20.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -0.50 TO 0.50 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 2.099 AND INCHES MAXIMUM 2.151 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| AAVM | PILOT LENGTH | INCHES MINIMUM 0.0290 AND INCHES MAXIMUM 0.0320 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.217 AND INCHES MAXIMUM 1.260 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 1.9375 AND INCHES MAXIMUM 1.9385 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0700 AND INCHES MAXIMUM 0.0900 |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | MINIMUM 319.0 AND MAXIMUM 321.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 0.60 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 105.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-8903 |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 1.9360 AND INCHES MAXIMUM 1.9370 |
| AEFY | SHAFT END PLAY | INCHES 0.006 |
| AEGA | LATERAL RUNOUT | INCHES 0.001 |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDER STUD 14 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -1.0 TO 1.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| BYDT | BEARING TYPE | SHAFT BEARING |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 4.0 |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -30.0 TO 30.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-8903 |
| ADAV | OVERALL DIAMETER | INCHES MINIMUM 2.099 AND INCHES MAXIMUM 2.151 |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MIL-R-8903 | 81349 |
| RRL16B203 | 81349 |