NSN 5905-00-951-4121 · NIIN 009514121 · FSC 5905
NO DASHES 5905009514121
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | INCHES NOMINAL 0.300 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 125.0 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 70.0 |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | MINIMUM 6120.0 AND MAXIMUM 9720.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | PIN 3 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.036 AND INCHES MAXIMUM 0.077 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 1.218 AND INCHES MAXIMUM 1.282 |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.235 AND INCHES MAXIMUM 0.300 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.235 AND INCHES MAXIMUM 0.300 |
| CQTM | TERMINAL LOCATION | LOWER ADJACENT SIDE TWO ROWS |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.254 AND INCHES MAXIMUM 1.359 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.469 AND INCHES MAXIMUM 0.624 |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 0.235 AND INCHES MAXIMUM 0.300 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.235 AND INCHES MAXIMUM 0.300 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.088 AND INCHES MAXIMUM 0.098 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.100 AND INCHES MAXIMUM 0.140 |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE(S) |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.25 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 250.000 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 6120.0 AND MAXIMUM 9720.0 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | INCHES NOMINAL 0.100 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 8.00 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | INCHES MINIMUM 0.109 AND INCHES MAXIMUM 0.160 |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MILR22097-1 | 81349 |
| RJ11AP254 | 81349 |