NSN 5905-00-954-4068 · NIIN 009544068 · FSC 5905
NO DASHES 5905009544068
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEDX | SHAFT STYLE | |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 6.00 |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 128.00 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.375 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.250 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 251.0 AND MAXIMUM 318.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 120.0 |
| CQPH | DEVICE DESIGN TYPE | AT 9:00 OCLOCK NONTURN |
| CQTM | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 1.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 70.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-94 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-94 TO 4 |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 1.274 |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AEFP | NONTURN DEVICE RADIUS | INCHES NOMINAL 0.438 |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.437 AND INCHES MAXIMUM 0.469 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.875 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 25.0 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 0.890 AND INCHES MAXIMUM 0.922 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.281 AND INCHES MAXIMUM 1.375 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES NOMINAL 0.375 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| RV2NAYSD253A | 81349 |
| MILR94-4 | 81349 |
| MIL-PRF-94/4 | 81349 |
| 928146 | 08904 |
Supersedes
This item replaces cancelled NIINs 000711632 · 001920714 · 002836454 · 005811185 · 006447005 · 007523738 · 007558759 · 008309026. An older drawing citing one of those numbers resolves here.