NSN 5905-00-957-9945 · NIIN 009579945 · FSC 5905
NO DASHES 5905009579945
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.75 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | PIN 3 |
| ADAT | BODY WIDTH | INCHES NOMINAL 0.220 |
| ABKW | OVERALL HEIGHT | INCHES NOMINAL 0.500 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.075 AND INCHES MAXIMUM 0.081 |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | INCHES NOMINAL 0.100 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 0.530 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.172 AND INCHES MAXIMUM 0.202 |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE(S) |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES NOMINAL 0.200 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.407 |
| ADAU | BODY HEIGHT | INCHES NOMINAL 0.500 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RIGHT ADJACENT SIDE SINGLE ROW |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.083 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.030 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 0.500 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | OHMS SINGLE SECTION 100.0 |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | INCHES NOMINAL 0.520 |
| AEDX | SHAFT STYLE |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| RT22C2P101 | 80294 |
| 5905PL0937143 | 9009H |
| 311801-1 | 00752 |