NSN 5905-00-965-7240 · NIIN 009657240 · FSC 5905
NO DASHES 5905009657240
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
37 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.540 |
| ABXF | SHAFT LENGTH | INCHES MAXIMUM 0.045 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 8280.0 AND MAXIMUM 13680.0 |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | INCHES MINIMUM 0.095 AND INCHES MAXIMUM 0.105 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 175.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED REAR END |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.058 AND INCHES MAXIMUM 0.098 |
| PMLC | PRECIOUS MATERIAL AND LOCATION | GOLD TER-INAL SURFACE |
| PRMT | PRECIOUS MATERIAL | GOLD |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 50.0 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.187 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.073 AND INCHES MAXIMUM 0.083 |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -50.0 TO 50.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 1.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 70.0 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | MINIMUM 8280.0 AND MAXIMUM 13680.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 10.00 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 10.00 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES MINIMUM 0.195 AND INCHES MAXIMUM 0.205 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | INCHES MINIMUM 0.513 AND INCHES MAXIMUM 0.526 |
| ADAT | BODY WIDTH | INCHES MAXIMUM 0.230 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| AEDX | SHAFT STYLE | |
| TTQY | TERMINAL TYPE AND QUANTITY | PIN 3 |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE(S) |
| BYDT | BEARING TYPE | SHAFT BEARING |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| CBME | CUBIC MEASURE | CUBIC INCHES 0.063 |
| AAPN | SECTION QUANTITY | 1 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 94580-966034 |
| AAQL | BODY STYLE |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 3250W-1-503 | 32997 |
| 3250W1-50K | 80294 |
| 3250W1-503 | 80294 |
| RT22C2W503 | 81349 |
| MIL-R-27208/4 | 81349 |
| 176100-010 | 81413 |
| 5080-50K | 91637 |
| 138-062-3503 | 95542 |
| 966034-40 | 94580 |
| 576R671H20 | 97942 |
Supersedes
This item replaces cancelled NIINs 006258086 · 010963042. An older drawing citing one of those numbers resolves here.