NSN 5905-00-965-7653 · NIIN 009657653 · FSC 5905
NO DASHES 5905009657653
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.063 |
| AEEZ | CONTACT ARM ELECTRICAL OFF POSITION | FULLY CCW |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.312 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| ABKW | OVERALL HEIGHT | INCHES NOMINAL 0.812 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.280 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.088 |
| ADAU | BODY HEIGHT | INCHES NOMINAL 0.312 |
| AEDX | SHAFT STYLE | |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 5.00 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES NOMINAL 0.300 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 1.250 |
| ADAT | BODY WIDTH | INCHES NOMINAL 0.280 |
| AAQL | BODY STYLE | |
| ABJT | TERMINAL LENGTH | INCHES NOMINAL 0.500 |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | INCHES NOMINAL 0.700 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 175.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -50.0 TO 50.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 1.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 50.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 9000.0 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 70.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | PIN 3 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 5.00 |
| AAPN | SECTION QUANTITY | 1 |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 9000.0 |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE(S) |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.125 |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | INCHES NOMINAL 1.000 |
| BYDT | BEARING TYPE | SHAFT BEARING |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 2088521-12 | 27914 |
| 3010P1-503 | 80294 |
| L240988-12 | 06845 |