NSN 5905-00-978-1010 · NIIN 009781010 · FSC 5905
NO DASHES 5905009781010
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
39 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AECZ | MOUNTING LIP DIAMETER | INCHES MAXIMUM 2.0000 |
| BYDT | BEARING TYPE | SHAFT BALL |
| AEFD | ACTUATOR TYPE | DOUBLE ENDED SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 356.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 1.00 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 0.50 |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0620 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 4.0 |
| AEDX | SHAFT STYLE | |
| ABWV | SHAFT DIAMETER | INCHES MAXIMUM 0.2497 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.438 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES MAXIMUM 1.8750 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| ABPA | UNDERCUT DIAMETER | INCHES MAXIMUM 1.875 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0730 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 2.000 |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 40.0 |
| AEFY | SHAFT END PLAY | INCHES 0.005 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -1.0 TO 1.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.003 |
| AEGC | SHAFT RADIAL PLAY | INCHES 0.004 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 13499-381-1437-00 |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDER STUD 3 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -0.30 TO 0.30 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 125.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.976 |
| AAQL | BODY STYLE | |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| AAPN | SECTION QUANTITY | 1 |
| AEFZ | SHAFT RUNOUT | INCHES 0.003 |
| AEGA | LATERAL RUNOUT | INCHES 0.005 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 20.0 |
| FEAT | SPECIAL FEATURES | REAR SHAFT LENGTH 0.481 INCHES MAXIMUM,DIAMETER 0.2497 INCHES MAXIMUM |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 381-1437-00 | 95105 |
| 381-1437-000 | 95105 |
| 330-12 | C7407 |
| 330-12 | 02111 |
| 330-0012 | 02111 |
| 381-1437-00 | 13499 |