NSN 5905-00-978-6656 · NIIN 009786656 · FSC 5905
NO DASHES 5905009786656
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 2.362 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 2.410 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.828 AND INCHES MAXIMUM 0.922 |
| AEDX | SHAFT STYLE | |
| AEEZ | CONTACT ARM ELECTRICAL OFF POSITION | FULLY CCW |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.375 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES MINIMUM 0.328 AND INCHES MAXIMUM 0.422 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 1.440 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-22 TO 5 |
| AAQL | BODY STYLE | |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 340.0 |
| CQPH | DEVICE DESIGN TYPE | LOCATION NOT OTHERWISE SPECIFIED AT 12:00 OCLOCK |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | HEAT SINK SINGLE SECTION 50.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 25.0 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | OHMS SINGLE SECTION 500.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 295.0 AND MAXIMUM 310.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-22 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 3.205 |
| AAPN | SECTION QUANTITY | 1 |
| AEFP | NONTURN DEVICE RADIUS | INCHES NOMINAL 0.500 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 40.00 |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 240.00 |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.248 AND INCHES MAXIMUM 0.251 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| RP152SD501KK | 81349 |
| MIL-PRF-22/5 | 81349 |
| MILR22-5 | 81349 |
| M22/05-00212SD | 81349 |
| N28511 | 81574 |
Supersedes
This item replaces cancelled NIIN 005185607. An older drawing citing one of those numbers resolves here.