NSN 5905-00-984-1548 · NIIN 009841548 · FSC 5905
NO DASHES 5905009841548
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
40 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS 360 DEG SINE-COSINE |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 40.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 1.40 |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 360.0 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 1.30 |
| AEFY | SHAFT END PLAY | INCHES 0.0005 |
| AEFZ | SHAFT RUNOUT | INCHES 0.0008 |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.001 |
| AEGC | SHAFT RADIAL PLAY | INCHES 0.0005 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 1.87500 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.06200 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.812 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 1.875 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.06200 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 2.000 |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 12 |
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR ALL SECTIONS 1.5 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.1248 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.500 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 2.062 |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 2.190 |
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 2.00000 |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.06200 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | 1ST SECTION -10.0 TO 10.0 AND 2ND SECTION -1.0 TO 1.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS 1ST SECTION 10.0 AND KILOHMS 2ND SECTION 300.0 |
| AEGD | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 3.0 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | ALL SECTIONS -0.30 TO 0.30 |
| CRJS | FIXED TAP QUANTITY PER SECTION | ALL SECTIONS 4 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | ALL SECTIONS 125.0 |
| BYDT | BEARING TYPE | SHAFT BALL |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED REAR END |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 009116864. An older drawing citing one of those numbers resolves here.