NSN 5905-00-985-3946 · NIIN 009853946 · FSC 5905
NO DASHES 5905009853946
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEDX | SHAFT STYLE | |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.039 AND INCHES MAXIMUM 1.231 |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 128.00 |
| AEFP | NONTURN DEVICE RADIUS | INCHES MINIMUM 0.516 AND INCHES MAXIMUM 0.546 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 1.100 AND INCHES MAXIMUM 1.310 |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ADAP | MOUNTING BUSHING LENGTH | INCHES MINIMUM 0.344 AND INCHES MAXIMUM 0.390 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.570 AND INCHES MAXIMUM 0.700 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 105.0 |
| CQPH | DEVICE DESIGN TYPE | LOCATION NOT OTHERWISE SPECIFIED AT 9:00 OCLOCK |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 2.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 1.750 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.469 AND INCHES MAXIMUM 0.531 |
| CBBL | FEATURES PROVIDED | PANEL SEAL |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 40.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-19 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-19 TO 2 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | MINIMUM 290.0 AND MAXIMUM 305.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 6.00 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 1.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 290.0 AND MAXIMUM 305.0 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.375 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.248 AND INCHES MAXIMUM 0.251 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MIL-PRF-19/2 | 81349 |
| RA20SASA102A | 81349 |
| MILR19 | 81349 |
| RA20SASB102A | 81349 |