NSN 5905-00-990-3697 · NIIN 009903697 · FSC 5905
NO DASHES 5905009903697
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
38 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| AEED | SWITCH VOLTAGE RATING IN VOLTS | 117.0 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | MINIMUM 230.0 AND MAXIMUM 275.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| ARNH | OPERATING POSITION | SWITCH START OF ROTATION |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CBBL | FEATURES PROVIDED | SWITCH |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 6.00 |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 128.00 |
| AEFP | NONTURN DEVICE RADIUS | INCHES MINIMUM 0.516 AND INCHES MAXIMUM 0.546 |
| AEGJ | SWITCH CONTACT ARRANGEMENT | SINGLE POLE, SINGLE THROW, NORMALLY OPEN, BOTH POSITIONS MAINTAINED |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.375 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-19 TO 3 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 3.690 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 1.590 |
| CQPH | DEVICE DESIGN TYPE | LOCATION NOT OTHERWISE SPECIFIED AT 9:00 OCLOCK |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 4.0 |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 2.135 |
| AEDX | SHAFT STYLE | |
| AEEA | SWITCH TYPE | ROTARY |
| CSDK | SWITCH CURRENT TYPE AND RATING IN AMPS | AC 3.000 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-19 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 5 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES NOMINAL 0.375 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 0.940 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 2.500 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | OHMS SINGLE SECTION 350.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 280.0 AND MAXIMUM 305.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 105.0 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.250 |
| AAPN | SECTION QUANTITY | 1 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 40.0 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MIL-R-19/3 | 81349 |
| RA30NBSK351A | 81349 |
| MIL-PRF-19/3 | 81349 |