NSN 5905-00-995-2975 · NIIN 009952975 · FSC 5905
NO DASHES 5905009952975
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
41 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEDX | SHAFT STYLE | |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 0.875 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 105.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 15 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.749 AND INCHES MAXIMUM 0.750 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 1.610 |
| AECZ | MOUNTING LIP DIAMETER | INCHES MINIMUM 0.8700 AND INCHES MAXIMUM 0.8750 |
| AEDA | MOUNTING LIP DEPTH | INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0670 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 0.60 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.1248 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.375 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| BYDT | BEARING TYPE | SHAFT BEARING |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 30.0 |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | SINGLE SECTION 449.8 AND SINGLE SECTION 717.7 AND SINGLE SECTION 989.5 AND SINGLE SECTION 1259.4 AND SINGLE SECTION 1529.3 AND SINGLE SECTION 1799.1 AND SINGLE SECTION 2069.0 AND SINGLE SECTION 2238.9 AND SINGLE SECTION 2608.8 AND SINGLE SECTION 2878.6 AND SINGLE SECTION 3148.5 AND SINGLE SECTION 3418.4 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 3500.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -0.10 TO 0.10 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 85.0 |
| AEGC | SHAFT RADIAL PLAY | INCHES 0.002 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.5 |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.7490 AND INCHES MAXIMUM 0.7500 |
| AAVM | PILOT LENGTH | INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0670 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | SINGLE SECTION 12 |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | OHMS ALL SECTIONS -1.7 TO 1.7 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.0015 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 0.60 |
| AEFY | SHAFT END PLAY | INCHES 0.005 |
| AEFZ | SHAFT RUNOUT | INCHES 0.001 |
| AEGA | LATERAL RUNOUT | INCHES 0.003 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0570 |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 3418.4 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |