NSN 5905-00-995-6000 · NIIN 009956000 · FSC 5905
NO DASHES 5905009956000
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
41 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 3.336 |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 1.707 |
| AAPN | SECTION QUANTITY | 4 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 1.3115 AND INCHES MAXIMUM 1.3120 |
| AEFD | ACTUATOR TYPE | DOUBLE ENDED SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 354.0 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 1.3115 AND INCHES MAXIMUM 1.3120 |
| AEFZ | SHAFT RUNOUT | INCHES 0.001 |
| AFJN | FRAGILITY FACTOR | MODERATELY DELICATE |
| AAVM | PILOT LENGTH | INCHES MINIMUM 0.0730 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.2494 AND INCHES MAXIMUM 0.2497 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.687 |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 1ST SECTION 172.5 AND 2ND SECTION 172.5 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | 1ST SECTION -0.15 TO 0.15 AND 2ND SECTION -0.15 TO 0.15 AND 3RD SECTION -0.50 TO 0.50 AND 4TH SECTION -0.50 TO 0.50 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | ALL SECTIONS 125.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 2.617 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 40.0 |
| PRMT | PRECIOUS MATERIAL | SILVER |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 10001-2303002 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR ALL SECTIONS 2.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS ABSOLUTE LINEARITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1ST SECTION 1 AND 2ND SECTION 1 |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | DEG ANGULAR ROTATION 1ST SECTION -0.5 TO 0.5 AND DEG ANGULAR ROTATION 2ND SECTION -0.5 TO 0.5 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | 1ST SECTION -1.0 TO 1.0 AND 2ND SECTION -1.0 TO 1.0 AND 3RD SECTION -5.0 TO 5.0 AND 4TH SECTION -5.0 TO 5.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| AEDX | SHAFT STYLE | |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0930 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 2.80 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 2.00 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 1.453 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| BYDT | BEARING TYPE | SHAFT BALL |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS 1ST SECTION 9.75 AND KILOHMS 2ND SECTION 9.75 AND OHMS 3RD SECTION 550.0 AND KILOHMS 4TH SECTION 1.1 |
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 1.4380 |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 14 |