NSN 5905-01-019-3462 · NIIN 010193462 · FSC 5905
NO DASHES 5905010193462
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
39 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.547 AND INCHES MAXIMUM 1.577 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 0.860 AND INCHES MAXIMUM 0.890 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.2497 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.812 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES MINIMUM 0.297 AND INCHES MAXIMUM 0.327 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.735 AND INCHES MAXIMUM 0.765 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | MINIMUM 3600.0 AND MAXIMUM 3610.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 0.50 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 0.40 |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 75.00 |
| AEFY | SHAFT END PLAY | INCHES 0.010 |
| AEFZ | SHAFT RUNOUT | INCHES 0.003 |
| AEGA | LATERAL RUNOUT | INCHES 0.005 |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.003 |
| AEGC | SHAFT RADIAL PLAY | INCHES 0.003 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.375 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| BYDT | BEARING TYPE | SHAFT SLEEVE |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 5.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 3600.0 AND MAXIMUM 3610.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -0.25 TO 0.25 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 125.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -20.0 TO 20.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 2.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 70.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 1356AS1187-1 | 30003 |
| 914122202-001 | 54206 |
| 534PANNEAU5K1SECTION | F2220 |
| 109201 | C1834 |
| 534BM502 | 02111 |
| 536-2-1-502 | 02111 |
| 534B5KSS | 02111 |
| 534BUSHING5K0HM | 02111 |
| 534-1-1-502 | 02111 |
| 109201 | 01220 |
| 534 | 02111 |
Supersedes
This item replaces cancelled NIINs 013355315 · 013826306 · 010178109 · 011837887 · 013028934. An older drawing citing one of those numbers resolves here.