NSN 5905-01-032-7598 · NIIN 010327598 · FSC 5905
NO DASHES 5905010327598
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
41 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABPM | BODY DIAMETER | INCHES MINIMUM 0.495 AND INCHES MAXIMUM 0.505 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.1248 AND INCHES MAXIMUM 0.1251 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.690 AND INCHES MAXIMUM 0.710 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES MINIMUM 0.297 AND INCHES MAXIMUM 0.327 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.300 AND INCHES MAXIMUM 0.310 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 320.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 12.00 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 12.00 |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 80.00 |
| AEFP | NONTURN DEVICE RADIUS | INCHES MINIMUM 0.182 AND INCHES MAXIMUM 0.192 |
| AEFY | SHAFT END PLAY | INCHES 0.006 |
| AEFZ | SHAFT RUNOUT | INCHES 0.002 |
| AEGA | LATERAL RUNOUT | INCHES 0.003 |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.002 |
| AEGC | SHAFT RADIAL PLAY | INCHES 0.003 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.250 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| BYDT | BEARING TYPE | SHAFT BEARING |
| CBME | CUBIC MEASURE | CUBIC INCHES 0.060 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 5.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 330.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -1.00 TO 1.00 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 150.0 |
| CQPH | DEVICE DESIGN TYPE | AT 6:00 OCLOCK |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED REAR END |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -20.0 TO 20.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 2.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 70.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 3 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 16684 | F2181 |
| 140-1-6-502 | C7407 |
| 140-1-6-502 | 02111 |