NSN 5905-01-035-7408 · NIIN 010357408 · FSC 5905
NO DASHES 5905010357408
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABNB | FIRST FLAT LENGTH | INCHES NOMINAL 0.370 |
| ABNC | FLAT HEIGHT | INCHES NOMINAL 0.216 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 1.000 AND INCHES MAXIMUM 1.094 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.248 AND INCHES MAXIMUM 0.251 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.900 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES MINIMUM 0.410 AND INCHES MAXIMUM 0.470 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 1.000 AND INCHES MAXIMUM 1.157 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 300.0 |
| AEFP | NONTURN DEVICE RADIUS | INCHES MINIMUM 0.427 AND INCHES MAXIMUM 0.447 |
| AFJN | FRAGILITY FACTOR | RUGGED |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.375 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 2.5 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 300.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 340.0 |
| CQPH | DEVICE DESIGN TYPE | LOCATION NOT OTHERWISE SPECIFIED AT 6:00 OCLOCK |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED REAR END |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.6 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 25.0 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 06481-914096 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |