NSN 5905-01-081-9448 · NIIN 010819448 · FSC 5905
NO DASHES 5905010819448
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.150 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.090 AND INCHES MAXIMUM 0.110 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.045 AND INCHES MAXIMUM 0.075 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.740 AND INCHES MAXIMUM 0.760 |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.150 AND INCHES MAXIMUM 0.170 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.300 AND INCHES MAXIMUM 0.320 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | MINIMUM 4320.0 AND MAXIMUM 6480.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 5.00 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 5.00 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES MINIMUM 0.690 AND INCHES MAXIMUM 0.710 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AXGY | MOUNTING METHOD | TERMINAL |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | INCHES MINIMUM 0.090 AND INCHES MAXIMUM 0.110 |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| CBME | CUBIC MEASURE | CUBIC INCHES 0.041 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | OHMS SINGLE SECTION 100.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 4320.0 AND MAXIMUM 6480.0 |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | INCHES MINIMUM 0.290 AND INCHES MAXIMUM 0.310 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 125.0 |
| CQTM | TERMINAL LOCATION | LOWER ADJACENT SIDE TWO ROWS |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -100.0 TO 100.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.75 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -20.0 TO 20.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 25.0 |
| CXHN | SHAFT BEARING TYPE | SLEEVE |
| FEAT | SPECIAL FEATURES | IMMERSION SEALED |
| TTQY | TERMINAL TYPE AND QUANTITY | PIN 3 |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 4600-11-0100 | 23338 |
| 43P101 | C7407 |
| 0631264 | F6151 |
| 41-4-1-101 | C7407 |
| 513387G1003 | FAQU7 |
| 513387G1003 | F6980 |
| 41-4-1-101 | 02111 |
| 43P101 | 02111 |
Supersedes
This item replaces cancelled NIIN 010616922. An older drawing citing one of those numbers resolves here.