NSN 5905-01-097-9866 · NIIN 010979866 · FSC 5905
NO DASHES 5905010979866
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
43 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAPN | SECTION QUANTITY | 3 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES MAXIMUM 2.8750 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| ABPA | UNDERCUT DIAMETER | INCHES MAXIMUM 2.875 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0730 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 3.250 |
| ABWV | SHAFT DIAMETER | INCHES MAXIMUM 0.250 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.625 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 3.070 |
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 3.0000 |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0930 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 350.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 4.50 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 3.00 |
| AEFY | SHAFT END PLAY | INCHES 0.00500 |
| AEFZ | SHAFT RUNOUT | INCHES 0.001 |
| AEGA | LATERAL RUNOUT | INCHES 0.001 |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.00100 |
| AEGC | SHAFT RADIAL PLAY | INCHES 0.001 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| BYDT | BEARING TYPE | SHAFT BALL |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS 1ST SECTION 1.000 AND KILOHMS 2ND SECTION 1.000 AND KILOHMS 3RD SECTION 10.000 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQDB | RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT | -65 DEG CELSIUS ALL SECTIONS -5.0 TO 5.0 AND 125 DEG CELSIUS ALL SECTIONS -5.0 TO 5.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | 1ST SECTION -0.50 TO 0.50 AND 2ND SECTION -0.50 TO 0.50 AND 3RD SECTION -0.10 TO 0.10 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | ALL SECTIONS 125.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FIRST SECTION FREE AIR 1ST SECTION 2.25 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | SECOND SECTION FREE AIR 2ND SECTION 1.5 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | THIRD SECTION FREE AIR 3RD SECTION 1.8 |
| CRGM | FUNCTION CONFORMITY PER SECTION | 1ST SECTION ABSOLUTE CONFORMITY AND 2ND SECTION ABSOLUTE CONFORMITY AND 3RD SECTION ABSOLUTE LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | ALL SECTIONS -10.0 TO 10.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | 1ST SECTION 360 DEG SINE-COSINE AND 2ND SECTION 360 DEG SINE-COSINE AND 3RD SECTION EQUATION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 70.0 |
| FEAT | SPECIAL FEATURES | ONE FIXED FILM RESISTOR INTERNALLY MTD EA CUP |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 10001-3274207 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 9 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 300FL3-125 | 08815 |
| 3274207 | 08815 |
| 3274207 | 10001 |
| 75717 | 10112 |