NSN 5905-01-100-6603 · NIIN 011006603 · FSC 5905
NO DASHES 5905011006603
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
37 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 2.697 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.124 AND INCHES MAXIMUM 0.126 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 1.156 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.248 AND INCHES MAXIMUM 0.250 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 1.375 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES NOMINAL 0.250 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 1.312 |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 1.812 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | DUAL CONCENTRIC |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | MINIMUM 309.0 AND MAXIMUM 315.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 6.00 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 6.00 |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 192.00 |
| AEFP | NONTURN DEVICE RADIUS | INCHES NOMINAL 0.531 |
| AEGD | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 3.0 |
| AGQL | UNDERCUT LENGTH | INCHES NOMINAL 0.625 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.375 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CBME | CUBIC MEASURE | CUBIC INCHES 1.377 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS 1ST SECTION 100.000 AND KILOHMS 2ND SECTION 10.000 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 309.0 AND MAXIMUM 315.0 |
| CQDB | RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT | -55 DEG CELSIUS 1ST SECTION 0.0 TO 8.0 AND -55 DEG CELSIUS 2ND SECTION 0.0 TO 7.0 AND -25 DEG CELSIUS 2ND SECTION 0.0 TO 3.5 AND -25 DEG CELSIUS 1ST SECTION 0.0 TO 4.0 AND 85 DEG CELSIUS 1ST SECTION -3.0 TO 3.0 AND 85 DEG CELSIUS 2ND SECTION -2.5 TO 2.5 AND 120 DEG CELSIUS 1ST SECTION 0.0 TO 6.0 AND 120 DEG CELSIUS 2ND SECTION 0.0 TO 5.5 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 120.0 |
| CQPH | DEVICE DESIGN TYPE | AT 9:00 OCLOCK NONTURN |
| CQTM | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR ALL SECTIONS 2.25 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | ALL SECTIONS -10.0 TO 10.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 70.0 |
| FEAT | SPECIAL FEATURES | OUTER SHAFT HAS FLAT LENGTH OF 0.468 INCHES MAXIMUM,FLAT HEIGHT OF 0.218 INCHES MAXIMUM; INNER SHAFT HAS FLAT LENGTH OF 0.390 INCHES MAXIMUM,FLAT HEIGHT OF 0.096 INCHES MAXIMUM |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 6 |