NSN 5905-01-113-1616 · NIIN 011131616 · FSC 5905
NO DASHES 5905011131616
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 0.625 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.249 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 1.500 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES NOMINAL 0.312 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 1.500 |
| AEDQ | UNDERCUT DIAMETER | INCHES NOMINAL 0.124 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | DUAL CONCENTRIC |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 270.0 |
| AEFP | NONTURN DEVICE RADIUS | INCHES NOMINAL 0.250 |
| AGQL | UNDERCUT LENGTH | INCHES NOMINAL 0.500 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.375 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AXGY | MOUNTING METHOD | LOCKING BUSHING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS 1ST SECTION 11.0 AND KILOHMS 2ND SECTION 5.5 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 297.0 AND MAXIMUM 303.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | ALL SECTIONS 125.0 |
| CQPH | DEVICE DESIGN TYPE | LOCATION NOT OTHERWISE SPECIFIED AT 12:00 OCLOCK |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR ALL SECTIONS 0.5 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | ALL SECTIONS -5.0 TO 5.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 70.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 6 |