NSN 5905-01-167-6975 · NIIN 011676975 · FSC 5905
NO DASHES 5905011676975
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
44 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 1.3120 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.1320 |
| ABPA | UNDERCUT DIAMETER | INCHES MAXIMUM 1.315 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0730 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 1.453 |
| ABWV | SHAFT DIAMETER | INCHES MAXIMUM 0.125 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.672 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 1.800 |
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 1.4370 |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0930 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 350.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 0.70 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 0.70 |
| AEFY | SHAFT END PLAY | INCHES 0.00500 |
| AEFZ | SHAFT RUNOUT | INCHES 0.001 |
| AEGA | LATERAL RUNOUT | INCHES 0.002 |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.00100 |
| AEGC | SHAFT RADIAL PLAY | INCHES 0.001 |
| AEGD | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 0.041 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| BYDT | BEARING TYPE | SHAFT BALL |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS ALL SECTIONS 5.000 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQDB | RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT | -65 DEG CELSIUS ALL SECTIONS -5.0 TO 5.0 AND -15 DEG CELSIUS ALL SECTIONS -4.0 TO 4.0 AND 50 DEG CELSIUS ALL SECTIONS -2.5 TO 2.5 AND 75 DEG CELSIUS ALL SECTIONS -5.0 TO 5.0 AND 105 DEG CELSIUS ALL SECTIONS -5.0 TO 5.0 AND 125 DEG CELSIUS ALL SECTIONS -5.0 TO 5.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | 1ST SECTION -0.05 TO 0.05 AND 2ND SECTION -0.10 TO 0.10 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | ALL SECTIONS 125.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR ALL SECTIONS 2.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1ST SECTION 1 |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | OHMS 1ST SECTION -250.0 TO 250.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | ALL SECTIONS -10.0 TO 10.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 1ST SECTION 2500.0 |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 40.0 |
| FEAT | SPECIAL FEATURES | 50KILOHM LOAD RESISTOR ON SECOND SECTION WIPER |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 03538-7648736 |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 7 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 23708 | 98659 |
| 7648736P13 | 03538 |
| 12616 | 04454 |
| 7648736P013 | 03538 |
| 7648736P13 | 13973 |