NSN 5905-01-197-8331 · NIIN 011978331 · FSC 5905
NO DASHES 5905011978331
In Stock
RESISTOR,FIXED,WIRE WOUND,INDUCT
Resistor
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAPE | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -50.0 TO 50.0 |
| AAPP | ELECTRICAL RESISTANCE | OHMS 1.000 |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -5.000 TO 5.000 |
| AAQG | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 125.0 |
| AAQH | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 125.0 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 1.125 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 0.140 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.400 |
| AEFB | POWER DISSIPATION RATING IN WATTS | FREE AIR 1.000 |
| AEHY | AMBIENT TEMP AT FULL RATED POWER | CELSIUS 25.0 |
| AKNA | INCLOSURE TYPE | ENCAPSULATED |
| CBME | CUBIC MEASURE | CUBIC INCHES 0.008 |
| CSCF | TERMINAL TYPE | WIRE LEAD |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 78711-R235A109 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| F508 | 54294 |
| F50815 | 54294 |
| R235A109-1 | 78711 |