NSN 5905-01-259-3515 · NIIN 012593515 · FSC 5905
NO DASHES 5905012593515
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | ESTABLISHED |
| AARH | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.010 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.172 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.075 |
| ABXF | SHAFT LENGTH | INCHES MAXIMUM 0.050 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 0.250 |
| ADAT | BODY WIDTH | INCHES NOMINAL 0.165 |
| ADAU | BODY HEIGHT | INCHES NOMINAL 0.250 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | MINIMUM 3600.0 AND MAXIMUM 9000.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 3.00 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 3.00 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES NOMINAL 0.200 |
| AXGY | MOUNTING METHOD | TERMINAL |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | INCHES NOMINAL 0.100 |
| CBME | CUBIC MEASURE | CUBIC INCHES 0.010 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | OHMS SINGLE SECTION 500.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 3600.0 AND MAXIMUM 9000.0 |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | INCHES NOMINAL 0.100 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 150.0 |
| CQTM | TERMINAL LOCATION | LOWER ADJACENT SIDE TWO ROWS |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -100.0 TO 100.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.25 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 85.0 |
| CXHN | SHAFT BEARING TYPE | SLEEVE |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-39035 |
| TTQY | TERMINAL TYPE AND QUANTITY | PIN 3 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-39035 TO 3 |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 110-0077-002 | 54296 |
| RJR26CX501M | 81349 |
| MIL-PRF-39035/3 | 81349 |
| MIL-R-39035/3 | 81349 |
| RJR26FX501M | 81349 |
| RJR26FX501P | 81349 |
| RJR26FX501R | 81349 |
| 7906458-33 | 90536 |
| 538422-40 | 96214 |
| 10127789 | A486G |
| MIS-19250FX501 | 18876 |
Supersedes
This item replaces cancelled NIINs 010145108 · 010574386. An older drawing citing one of those numbers resolves here.