NSN 5905-01-291-7663 · NIIN 012917663 · FSC 5905
NO DASHES 5905012917663
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
38 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAPN | SECTION QUANTITY | 3 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABNB | FIRST FLAT LENGTH | INCHES MINIMUM 0.312 AND INCHES MAXIMUM 0.375 |
| ABNC | FLAT HEIGHT | INCHES NOMINAL 0.188 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 3.000 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.219 AND INCHES MAXIMUM 0.281 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 1.125 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES MINIMUM 0.594 AND INCHES MAXIMUM 0.656 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 6.281 AND INCHES MAXIMUM 6.344 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | MINIMUM 295.0 AND MAXIMUM 305.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 64.00 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 40.00 |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 240.00 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.375 AND INCHES NOMINAL 0.164 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF AND UNIFIED NATIONAL COARSE (UNC) |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AKPV | MOUNTING FACILITY QUANTITY | 4 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING AND THREADED HOLE(S) |
| BYDT | BEARING TYPE | SHAFT BEARING |
| CBBL | FEATURES PROVIDED | PANEL SEAL |
| CBME | CUBIC MEASURE | CUBIC INCHES 45.400 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | OHMS 1ST SECTION 45.0 AND KILOHMS 2ND SECTION 2.5 AND KILOHMS 3RD SECTION 2.5 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 295.0 AND MAXIMUM 305.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | ALL SECTIONS 340.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FIRST SECTION FREE AIR 1ST SECTION 50.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | THIRD SECTION FREE AIR 3RD SECTION 25.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | SECOND SECTION FREE AIR 2ND SECTION 25.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | ALL SECTIONS -10.0 TO 10.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 25.0 |
| FEAT | SPECIAL FEATURES | THREE VARIABLES MOUNTED IN STEEL BRACKET |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 06481-914107 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 9 |